This hand-held electric capping machine is mainly used for screwing and unscrewing of the screw cap. Easy to carry, this tool can be easily used to tighten or loosen the cap. The adjustable clutch(adjust strength) can effectively avoid the cap damage and reduce the wear inside the plug. Once the cap is fully tightened, the machine automatically stops rotating head that you can cap the next operation. The capping machine include: host, aluminum capping head and buffer tucked inside.
It is suitable for all kinds of high strength bottle caps capping work, apply to the bottle cap direct range of 10-50 mm, single production capacity of up to 30-90 bottles / min (depending on proficiency).
Put chuck onto the cap to be tightened.
Push down switch to active the capper.
The capper starts and tightens the cap.
The capper automatically shuts off while reaching the pre set torque.
This machine is only for 110 V, if you need 220 V, you need to buy a voltage transformer in addition.
This tool is mainly designed to unscrew and tighten of kinds of screw caps.
Please allow slightly error due to manual measurement.
- Brand New and high quality
- Relieve operator from blisters, fatigue and potential carpal tunnel damage caused by hands and wrists overworking
- Press to start
- Auto shutdown
- Quiet operation
- Overload indicator
- Light weight
- Compact size
- Ergonomic grip; handle for human body engineering
- 2 years warranty
- Type: Hand-held electric capping machine
- Material: Metal, plastic
- Color: Red
- Cable length: 5.74' (1.75m)
- Electrical source: AC 110V 60Hz
- Power consumption: 80w
- Work type: Electric capping
- Operation forms: Handheld
- Capping diameter: φ10-50mm
- Production capacity: 30-90 bottles / minute (depending on proficiency)
- Bottle height: Not limited
- Torque: 50-25kgf.cm
- Fitment: For screwing and unscrewing of the screw cap
- Rubber insert: 10 - 20 mm; 20 - 30 mm; 30 - 40 mm; 40 - 50 mm
- No-load speed: 1000 r/min
- Clutch: Adjustable
- Cable plug adapter: US plug
- Machine size: 2.75" × 2.75" × 11.8" (7×7×30 cm)
- N.W.: 2.54lbs (1 kg)
- 1 × Electric Capping Machine
- 1 × Spring Balancer
- 4 × Rubber Insert
- 2 × Chuck
- 1 × Plug Adapter
- 1 × M5 Allen Key
- 1 set × Auxiliary tools
Handheld Electric Bottle Capping Machine Screw Capper Sealing Machine 110V